Jaw Crusher Stone

Jaw Crusher Stone Parameter：

Jaw Crusher Stone Introduction

Jaw crusher stone is a crushing machine which is composed of two jaw plates, the movable jaw and the static jaw, to complete the crushing operation by simulating the movement of two jaws of animals. It is mainly used for crushing various ores and large materials.

Jaw Crusher Stone Working Principle

When the jaw crusher stone is working, the belt pulley driven by the motor drives the eccentric shaft to rotate, so that the movable jaw slowly and orderly approaches and leaves the fixed jaw, thus producing multiple effects on the material such as extrusion, so that the material changes from large to small and gradually falls down, and finally discharges directly from the discharge port.

Jaw Crusher Stone Application fields

Jaw crusher stone (jaw crusher) is mainly used for medium crushing and coarse crushing of various materials with compressive strength not exceeding 320 MPa, with the characteristics of large crushing ratio, high output, simple structure and economic operation cost. Therefore this product is used in mining, smelting, building materials, and other industries.

Packaging and Shipping

There are different packages for different sizes of machines. The normal packaging is wooden box. If exported to European countries, the wooden frame will be fumigated. If the container is too tight, the company will use PE film according to the special requirements of customers. 

The company will also customize the sales according to the actual needs of the customers. The project will be designed by the engineer and the company will start the production after receiving the deposit from the customer. Please rest assured that no matter the size of the equipment, we can deliver on time and pay the balance after delivery.

Jaw Crusher Stone Performance characteristics

1. Most of the movable jaw components are made of high quality cast steel, which makes better durability and reliability.

2. The cast steel housing is one-piece, so it can be completely embedded with the frame. Also, the radial strength of the shell is greatly enhanced, reducing maintenance costs.

3. The bearings of this product are larger than the bearings of the same size, and the load capacity is stronger, while the high load capacity of the product and the strict seal setting correction extend the bearing life.

4. The crushing chamber is "v" symmetrical. The symmetrical setting makes the speed of the machine more reasonable, the feed size is larger, the output is higher, the size is more uniform, and the wear of the jaws is reduced.

5. Fast discharge outlet adjustment device. Hydraulic wedge type discharge outlet adjusting device, easy to adjust the size of the discharge outlet and improve the automation of inspection.

6. The machine adopts large centrifugal force and steep elbow joint plate tilt angle setting, large stroke, proper speed and flywheel inertia to ensure better crushing performance.

7. Tooth protection. The machine uses new type of tooth protection plate, which improves the output and extends the maintenance cycle of wearing parts.

8. Due to the reasonable structure setting, it makes the performance of the product more stable. Meanwhile, the whole machine is designed as a module type, which is easy to disassemble and transport. The high movable jaw tooth plate can reasonably protect the movable jaw and bearing chamber, but also ensure the smooth supply of material, avoid blockage phenomenon, and realize good continuous crushing operation performance.

FAQ

1. What are the advantages of the product?

(1) Uniform particle size, less over-crushing phenomenon, one-time crushing, reducing investment and production costs.

(2) The roll surface is made of manganese steel and carbon steel, and the roll is made of pig iron to increase the service life of wear parts.

(3) The sealing performance is good, the dust is less, the noise is low, and the working environment is greatly improved.

2. How long is the warranty period of the product?

1 year

3. What is the production capacity of this product?

There are different models of this machine, and different models have different feed size, output and finished size. You can refer to the parameter table to choose the most suitable machine model.

4. What are the structures of this product?

The structure of Jaw crusher stone is mainly composed of frame, eccentric shaft, big pulley, flywheel, moving jaw, side guard, elbow plate, elbow plate back seat, gap adjusting screw, reset spring, fixed jaw plate and movable jaw plate, among which the elbow plate also plays the role of insurance.

Our service

We can tailor your products to ensure your actual benefits; we will provide regular return visit services after you purchase products; we will arrange delivery as soon as possible; help users optimize and maintain equipment.

Introduction of our company

Zhongxiang machinery company to integrity-based, quality shall prevail, adhere to the development of fine and specialized direction, the implementation of high-quality goods strategy, to create a distinctive brand, pay attention to personalized product design, continuous technological innovation, in order to meet the needs of customers to enhance the value; good service to the majority of customers at home and abroad.

Zhongxiang machinery with strong strength, advanced technology and excellent product quality to obtain the recognition of users in various industries, and in the fierce market competition to stand invincible. Zhongxiang Machinery will choose the suitable model for you according to your industry output requirements and serve you wholeheartedly.

Hot Tags: jaw crusher stone, China jaw crusher stone manufacturers