Pig Feed Pellet Mill Machine

Pig Feed Pellet Mill Machine Parameter：

Pig Feed Pellet Mill Machine Product introduction

The arrival of the pig feed pellet mill machine has revolutionized the way we process and feed animals. This innovative model combines the best features from both domestic and foreign pellet machines, making it a truly energy-efficient product. Gone are the days when feed had to be processed into inconvenient powder form before it could be given to livestock. This outdated method had its shortcomings, such as difficult feeding, unappetizing taste, and selective eating by animals. Additionally, the utilization rate of the feed was relatively low. However, thanks to the widespread use of new small pellet feed machinery, turning powder feed into easily digestible pellets has become a breeze. Livestock can now enjoy a more convenient and nutritious meal, vastly improving their overall well-being.

If you're a small farmer lacking the luxury of three-phase electricity, the Pig Feed Pellet Mill Machine could be your solution. This versatile machine can be powered using standard 220V single-phase electricity and is capable of producing granules that can be easily adjusted in length. The granules are extruded through the die hole under the pressure of the pressing roller, delivering quality results with ease. Whether you're handling your feed production independently or as a group of farmers, this machine is a practical investment that'll save you time and money.

Pig Feed Pellet Mill Machine Main feature

1.Simple structure of pig feed pellet mill machine, wide adaptability, small footprint and low noise.

2. Powdered feed and grass powder can be pelleted without adding a little liquid, so the moisture content of pelleted feed is basically the moisture content of the material before pelleting, which is more convenient for storage.

3. Chicken, duck, fish, etc., can obtain higher economic benefits than mixed powder feed.

Application method

1. The gearbox of pig feed pellet mill machine can be turned on after adding hyperbolic gear oil.

2. Install the Pig Feed Pellet Mill Machine smoothly, adjust the belt tightness. Whether the steering meets the requirements, whether the screws in each part are loose, loosen the clearance adjustment screws on the roller shaft seat, so that the feed machine is in a no-load state, and it can be put into operation after it starts and runs normally. use.

3. Before the new machine is used for the first time, take 10 jins of vegetable oil or waste oil and mix it well and turn the clearance adjustment screw. Make the two rollers rotate at the same speed. Gradually add the refueling feed, and at the same time continue to screw the adjusting screw of the pressing wheel until the pellets are slowly extruded. The extruded pellets are repeatedly squeezed to make the die hole lubricated and smooth, and then slowly add the mixed feed to be processed for processing, such as feeling the die. If the hole resistance is large, the output is low or no material is produced, the template can be repeatedly ground according to the above method to make the die hole lubricated and smooth before processing.

4. During feed processing, if there are more refined fibers, about 5 water should be added. If there are more concentrates in the mixed feed, less water can be added as appropriate. After processing, add a little oil that has been mixed with edible oil in advance, which is beneficial to the next step. Start the machine again to avoid the feed drying in the hole after the machine is shut down.

5. After processing, loosen the clearance adjustment screw to keep the roller in a free state, and clear up and down after stopping. The residual material in the warehouse is fouled, especially the residual material at the bottom of the shaker, so as to avoid damage to the suction bearing.

Shipping

FAQ

1.Why is the pellet machine always blocked when it is used for the first time?

The difference between the granulator and other machines is that the new machine or the new grinding disc should be ground for the first time. The holes on the grinding disc are drilled one by one, and the hole wall is not smooth. Directly made from raw materials, the resistance is large, and it is easy to block. After repeatedly grinding through the grinding disc holes with abrasives, the ingredients can be made normally.

2.Does the pellet machine have any requirements for raw materials?

Grain can not be pulverized, but grass and straw must be pulverized before processing, because the particles made of powder are evenly nutritious.

Hot Tags: pig feed pellet mill machine, China pig feed pellet mill machine manufacturers